Testing
Contact: Kristina Essbach
The development of part groups is marked by a high complexity.
The accurate balanced interaction of simulation and trial allows to give already in an early development stage authorative forecasts. Thus, simulation and testing support and confirm the design process and
complete the development.
Technical design + simulation + testing = DEVELOPMENT
Acoustic measurement booth
- Sound power determination acc. to DIN EN ISO 3744, February 2011, accuracy class 2
- Two-shelled, fully decoupled construction of the ceiling and walls along with a double sprung floor.
- Acoustic measurement booth dimensions: L/W/H: 220 x 220 x 200
Fluid Engineering
Alternating pressure test
- 2 different testing circuits
- Pressures can be chosen flexible between 0 – 20 bar and 0 – 45 bar
- Temperature range mutable adjustable between +5 °C to +90 °C
- Temperature, time and pressure profiles are freely programmable
Waterhammer test
- Pressure range 0 – 20 bar
- Temperature range mutable adjustable between +5 °C to +90 °C
- Temperature, time and pressure profiles are freely programmable
Thermal- shock test
- 2 different testing circuit, temperatures can be used in any combinations (hot-hot, hot-cold, cold-cold)
- Temperature range mutable adjustable between +5 °C to +90 °C
- Temperature, time and pressure profiles are freely programmable
Thermo- crash test
Pre-aging test for the simulation of the durability under thermic conditions
- Pressure range 5 bar
- Temperature range mutable adjustable from +95 °C to +160 °C
Agingtest
Pre-aging test of material for the simulation of the durability and/or for the analysis of field phenomenas
- Treatment of the samples with solution
- Additional analysis
Individual test set-ups
e.g. life test flow sensors with polluted water with concomitant testing of the charactersitic line
- Flow range: 2 – 10 l/min
- Temperature range up to +60 °C
- Water ingredients / degree of pollution selectable
Test bench technology cooperation with Automobil Technikum Bayern in Hof
Infrared camera
- Temperature range: from -40° C to +1.200° C
- Max. resolution 768x576 infraredpixel
Digital light microscopy
- Resolution 54 Millionen Pixel enlargement 0 – 200
- 3D-profile measurement
Clamping plate with testing cylinder
- Clamping plate with servo-hydraulic testing cylinder up to 40kN as universal, modular fixturing kit
Robots
- Freely programmable KUKA robot for long time loading test
Climatic chamber
- Chamber size: 1,5 m³ bis 30 m³
- Temperature range: from -70° C to +180° C
- Humidity: up to 95% r.h
Salt spray mist chamber
- Test up to + 50° C
- Testing volume ca. 2 m³
Condensating water test
- Temperature range up to + 45° C
- Testing volume ca. 2 m³
Material testing machine
- Pressure and tension testing
- Nominal strength 20kN
Prüfkörper Xbody
Xbody
CAXsolutions has developed its own neutral test specimens that make it possible to perform a broad range of different operational readiness tests in the company’s own laboratory.
Possibilities:
- One or two components
- Wall thickness 1,5 mm or 3 mm
- Central or lateral gating position
- Cover fixed by spin welding
Test vody to compare different material:
- Material pre-aging tests
- Generation of material parameters for component design
- Burst pressure tests
- Creep rupture tests
- Welding tests
- Determination of mechanical parameters under temperature influence
